Posted on

Custom French Rod

FRENCH RODS, ½” & ¾” DIAMETER

One of the most popular drapery hardware styles right now are French Rods that return to the wall. We offer many options to configure these rods to your application.

 

ONA French Curtain Rod

 

French Rods for ½” and ¾” diameter rods are solid. We Heat & Bend the returns to the rod in one piece. The return ends are drilled to slip onto pinned bases. Provide Face width measurement when ordering. Standard projection is 3½” to rod center. Please specify if you require a custom projection. Minimum projection available is 1½”. Specify base style. Center supports are recommended for rods over 60″. Swivel base brackets are recommended as center supports and can be ordered with coordinating bases. Café brackets are suggested as center supports for ½” rods using Café bases under 3½” projection.

Easy to order,
1. Specify: Face With, Rod Style, Pinned Base Style and Finish.
2. Standard projection is 3½” measured to the rod center. Please specify if you require a custom projection.
3. Order additional brackets, rings and batons as needed.
4. Pricing: Rod cost = face width + return lengths rounded up to the next full foot + each heat & bend return (returns include pinned bases of your choice).

 

 

FRENCH RODS, 1″ & 1-5/8″ DIAMETER

One of the most popular drapery hardware styles right now are French Rods that return to the wall. We offer many options to configure these rods to your application.

French Rods for 1″ and 1-5/8″ diameter rods are hollow. Returns are sold separately and splice into the rod ends. Returns without bases require brackets. Returns with welded bases suspend the rod and allow for direct installation. Standard projection is 3½” to rod center. 6″ projection available at no extra charge (6½” for 1-5/8″ rods). Custom projection available at an extra charge. Provide Face width measurement when ordering. Center supports are recommended for rods over 96″. See coordinating bracket section.

Easy to order,
1. Specify: *Face With, Rod Style, Return Style and Finish. * We will cut rods to the appropriate length to equal your specified face width.
2. Standard projection is 3½” measured to the rod center. Please specify if you require a custom projection.
3. Order additional brackets, rings and batons as needed.
4. Pricing: Rod cost = Face width – 10″ (for returns) rounded up to the next full foot + each return.

For price quote write us to bobby.m9@icloud.com

Posted on

Custom made assembly

SPLICES, BAY RODS & CURVED RODS

Splice
We can ship rods up to 118″ in one piece with standard shipping service. For rods longer than 118″ we recommend splicing. If you require a one piece rod longer
than 118″ please call for a freight quote.custom curtain rod splice
Easy to order,
1. Specify overall rod length and indicate location of splice if other than center. A bracket must be used at each splice point for support.
Miter Cut with Adjustable Joint
The best solution for 1″ or 1-5/8″ bay and corner rods. Adjustable joint is available with 1″ and 1-5/8″ rods only. Rod ends will be miter cut to the angle you specify.
Adjustable joint is hinged to allow adjustment to match mitered angles and slides inside the rod. Set screws on backside of rod tighten to join rod together.
Easy to order,
1. Specify wall angles and backwall measurements (not including finials). We will make the necessary deductions. Adjustable brackets are recommended.
Four brackets are usually sufficient for most three-sided bay windows.
Miter Cut & Weld
Recommended for ½” or ¾” rods.
Specify wall angles and backwall measurements (not including finials).
Adjustable brackets recommended.
Freight shipment may be required.
Miter Cut Only
Recommended when butting ½” or ¾” rods together.
Please specify wall angles and backwall
measurements (not including finials).
Adjustable brackets recommended.
Curved Corner Joint*
For 1″ & 1-5/8″ rods only. Measures 5″ x 5″. Splice
rods into curved corner joint to create a soft 90˚
curve. Non load bearing*.

Continuously Curved Rods
We offer custom curving for bay, bow and arched windows for all of our rods. Rings or tabs can be welded to rods if necessary. Templates are required for bow and arched rods. Please indicate on template where rod ends (not including finials). Adjustable brackets are recommended. Freight shipment may be required.

BATONS, WINDOW CRANES & SCROLL RODS
Iron Batons
Designed to facilitate opening and closing drapery panels. Made of ½” round iron. Specify length (36″, 48″ and 60″ are most common). Hammered end is standard.
A finial may be added for an additional charge. Please specify finial style. Designed to clip on to the body of the lead ring of the drapery panel (not the eyelet).

Window Cranes
Available in ½” round up to 36″. Will support up to 8 lbs. Also available in ¾” round up to 36″. Will support up to 12 lbs. Specify rod length between finial and hinge.
Specify finial style. Base is 2″ round. Projection to rod center is 1½” (custom projection available for an additional charge).

Window Crane Support
Provides additional support and maintains a level appearance for window cranes. Base is 2″ round. Length is 2¾”, (custom length available for an additional charge).

Scroll Rod with Pegs
Specify length tip to tip (up to 60″ maximum).
Specify peg spacing (5″ is typical).
2 concealed round swivel brackets are included and serve as the first attachment
points for treatments.
Custom curving available per quote (template required).

Posted on

ONAVERSE™

Our patented ONAVERSE™ 1-5/8″ diameter iron cord traverse rods move heavy panels with ease. Our exclusive design features an internal mechanism that is not visible from below. Friction reducing glides along the top of the rod ensure smooth and quiet operation. ONAVERSE™ rods utilize our 2″ I.D. rings with eyelets as standard. 2½” C-rings are available for special applications. Pair with any of our standard 1-5/8″ components (finials, brackets etc…). Continuous curving is available for bay and bowed window applications. ONAVERSE™ rods are heavy duty, and feature all steel ball bearing pulleys for maximum durability and superior function. Optional motorization kit is available.

Easy to order,
1. Specify overall rod length (not including finials). Brackets should be installed a minimum of 3″ in from the rod ends. Please allow extra rod length to accommodate this. Specify finish.
2. Indicate if rod will be two way draw, one way stack left, or one way stack right.
3. Specify the cord location either right or left, and the length of cord drop you require. Note: Baton draw is available on request.
4. Order brackets, finials and rings as required. Master carriers include two rings per carrier.

Note: Maximum span between brackets is 120″. Maximum rod length (one piece) is 240″. Maximum recommended panel weight is 6 pounds per foot. We do not recommend splicing. A steel tension pulley is standard. Motorization is optional. Heavy duty brackets are recommended for panel lengths over 108″, spans over 96″, projections over 3-1/2″, and for double rod sets. Professional installation into studs or wood backing is recommended.

Bypass brackets and C-Rings
Available for special applications.
Rings are 2½” diameter.
Recommended for large curved rods
or excessive spans.
Lock Ring
For use with inside mount socket
brackets only. Slides into rod end.
Order one per cord side.
BTX® Motorization Kit
Add the convenience of motorization to ONAVERSE™ traversing rods. Motorization kit includes everything you need. Simply plugs into nearest wall outlet. Low voltage (12 volt) motor drives the cord to traverse draperies. Hand held remote control with radio frequency ensures positive operation.

For price quote or collection details write us to bobby.m9@icloud.com

Posted on

GROMMAVERSE™

Easily move grommeted panels with our new GROMMAVERSE™ 1-5/8″ diameter iron cord traverse rod. Featuring our patented ONAVERSE™ cord traverse system. The internal mechanism is not visible from below. Friction reducing glides along the top of the rod ensure smooth and quiet operation. GROMMAVERSE™ 1-5/8″ diameter iron rods are designed to utilize #15 grommets in conjunction with the GROM-A-LINK™*pleat control system. Block brackets are recommended. Select any of our standard 1-5/8″ finials. Continuous curving is available for bay and bowed window applications. GROMMAVERSE™ rods are heavy duty, and feature all steel ball bearing pulleys for maximum durability and superior function. Optional motorization kit is available.

Easy to order,
1. Specify overall rod length (not including finials). Brackets should be installed a minimum of 3″ in from the rod ends. Please allow extra rod length to accommodate this. Specify finish.
2. Indicate if rod will be two way draw, one way stack left, or one way stack right.
3. Specify the cord location either right or left, and the length of cord drop you require. Note: Baton draw is available on request.
4. Order Block Brackets, and finials as required.
5. 2 X panel fullness is recommended. An even number of grommets are required (usually 8 grommets per width).

Note: Maximum span between brackets is 120″. Maximum rod length (one piece) is 240″. Maximum recommended panel weight is 6 pounds per foot. We do not recommend splicing. A steel tension pulley is standard. Motorization is optional. Block Brackets are recommended. Professional installation into studs or wood backing is recommended.

Block Brackets
Recommended for GROMMAVERSE™
rods. Specify finish.
Grommet # 15
Grommet size # 15 is 2″ inside diameter. For GROMMAVERSE™ rods. Specify finish.
BTX® Motorization Kit
Add the convenience of motorization to ONAVERSE™ traversing rods.
Motorization kit includes everything you need. Simply plugs into nearest wall outlet. Low voltage (12 volt) motor drives the cord to traverse draperies. Hand held remote control with radio frequency ensures positive operation.

For price quote & collection related details write us to bobby.m9@icloud.com

Posted on

ONARAIL™

ONARAIL™ is perfect for Loft / Industrial and ranch décor. Add our BARN WHEEL SET to create a popular Barn Door look over any window. ONARAIL™ can be used as standalone rods or as under rods for sheers behind an ONA Iron rod. Available in cord traverse or baton draw operation. Sturdy aluminum/steel construction supports 5 lbs/foot. Brackets recommended every 4′- 5′. Sold as an assembled set.

Easy to order,
1. Sold as an assembled set. Includes master carriers, pulleys, ball bearing sliders (1 every 3½”), end stops, return extender, end caps and a metal tension pulley. Brackets, splices and Barn Wheel sets sold separately. Curved rods are available. Please call for a quotation.
2. Specify if baton or cord draw. Specify: Rod length, one way or two way draw, cord side, cord drop and finish. If baton draw, order batons separately.
3. For best function we recommend against splicing. However, If rods are to be spliced, let us know the overall rod length, and the splice locations.

 

For price quote or details regarding collection write to us on bobby.m9@icloud.com

 

Posted on

Heavy-Duty Ball Bearing Traverse System

Heavy-Duty Ball Bearing Traverse System

For Pinch Pleat or Ripplefold® style

System Features:

• Heavy-Duty System supports up to 8 lbs/ft
• center and one-way draw available
• right or left cord placement available; must be specified
• Pinch Pleat or Ripplefold® style glides available (80%, 100%, or 120% fullness)
• continuous track available up to 20’; spliced lengths available up to 38’ (center draw only)
• color coordinated track and brackets in Gold or Bronze
• glides and pulleys available in White only
• decorative wood fascia available in 2 ¼” fluted or smooth profiles
• all Quick Ship Wood and Resin finishes available
• fascia may not be used with ceiling mount system
• not available for use with rings

Benefits of Heavy-Duty Ball Bearing Traverse Systems:

• Heavy-Duty System is recommended for heavier treatments with lining
• ideal solution for treatments mounted over 10’ from floor
• longer lengths are versatile for residential or commercial projects

How to Order:

1. choose a style: 2. choose a glide: 3. choose a fascia and finish
• single or double system

• without rings only

• Standard Pinch Pleat

• Ripplefold® style

• 2 ¼” fascia fluted or smooth profile

Finials are sold separately. 2 ¼” Quick Ship Wood and Resin finials are compatible.

Heavy-Duty Ball Bearing Traverse System Includes:

Heavy-Duty Track
• available in Gold, Bronze, or White
• track and brackets color coordinated to complement fascia finish; end pulley and glides in White only
• may be ordered with or without wood fascia

BRACKETS:

Single Traverse Brackets
25⁄8″ H x 11⁄2″ W backplate
• adjustable 3 ½” – 4 ½” return
• available in Gold, Bronze, and White
• included in Single System
Single Ceiling Mount Bracket
3⁄8″ H x 25⁄8″ Deep x 7⁄8″ W
• available in White
• may only be used in systems without fascia
• single bracket; may be substituted for Single
or Double Systems
• for double ceiling mount installation, install two
individual bracket clips into ceiling
• ceiling mount bracket clips are also used to
attach fascia L-bracket to track
Double Traverse Bracket
33⁄8″ H x 11⁄2″ W backplate
• adjustable 5 ½” – 6 ¼” front return;
adjustable 2 ½” – 3 ½” back return
• available in Gold, Bronze, and White
• included in Double Systems; may be
substituted for Single Systems when
6″ return is needed
Traverse Fascia L-Bracket
1⁄2″ H x 11⁄2″ W
• combines with bracket clip to attach fascia to Ball Bearing
Traverse System
• included in system; additional L-Brackets may be ordered separately

Ball Bearing Over-Bracket
31⁄2″ H x 3⁄4″ W backplate, 73⁄4″ front pole return; 3″ back track return
• available in 5 Quick Ship Wood and Resin finishes
• use to combine  2 ¼” full wood pole with Single Traverse Systems
• traverse mounting bracket simply attaches directly into the bottom of the Over-Bracket
• must specify: back fascia, if desired

Pricing & more traverse system details write us to on bobby.m9@icloud.com.

Posted on

Light-Duty Basic White Traverse System

Light-Duty Basic White Traverse System

For Pinch Pleat

Light-Duty Basic White Traverse System

System Features:

• Light-Duty Basic White Traverse System supports up to 4 pounds per foot
• center and one-way draw available
• right or left pull option built-in; no restringing required
• simple pull and release action operates draperies with ease
• continuous track available up to 20’; spliced lengths available up to 38’
• track, brackets and components available in White
• decorative wood fascia available in 2 ¼” fluted or smooth profiles
• all Quick Ship Wood and Resin finishes available
• not available for use with rings

Benefits of EasyPull™ Light-Duty Traverse Systems:

• Light-Duty Basic White Traverse System is a perfect application for sheers as well as medium weight fabrics
• Light-Duty Basic White Traverse System without fascia is an ideal solution behind cornices and valances
• longer lengths are versatile for residential or commercial projects
• adjustable one cord feature allows user to determine placement of pull cord
• pre-corded for easy installation with glides and master carriers installed
• easy to install – track snaps into brackets, fascia clips onto track

How to Order:

1. choose a style: 2. choose a fascia and finish:
• single or double system

• without rings only

2 ¼” fascia fluted or smooth profile

5 Quick Ship Wood and Resin finishes

 

Finials are sold separately. 2 ¼” Quick Ship Wood and Resin finials are compatible.

Light-Duty Traverse System White

 

EasyPull™ Traverse Systems Include:

Light-Duty Track
• available in White only
• may be ordered with or without wood fascia

BRACKETS: Brackets designed for easy installation – simply snap track into plastic tab on bracket.

3″ EasyPull™ Single Bracket

23⁄8″ H x 11⁄8″ W backplate
• available in Gold, Bronze, or White
• included in Single Systems

6″ EasyPull™ Double Bracket

23⁄8″ H x 11⁄8″ W backplate
• available in Gold, Bronze, or White
• included in Double Systems; may be
substituted in Single Systems when
6″ return is needed

Ceiling Mount Bracket

3⁄8″ H x 2 ½” Deep x 7⁄8″ W
• available in White
• single bracket; may be substituted
in Single or Double Systems

EasyPull™ Over-Bracket

31⁄4″ H x 1 1⁄8″ W backplate,
67⁄8″ Return
• available in5 Quick Ship Wood and
Resin finishes
• used to combine 2 ¼” wood pole with Single Systems
• traverse mounting bracket simply installs under
Over-Bracket using the same screws
• matching shims are provided for other traverse brackets

Pricing & more traverse system details write us to on bobby.m9@icloud.com

Posted on

Heavy-Duty Traverse System

EasyPull™ Heavy-Duty Traverse System:
For Pinch Pleat

Heavy-Duty Traverse System How to Order: 1. choose a style 2. choose a fascia and fi nish • single or double system • 2" or 2 ¼" fascia • 30 Portfolio fi nishes • with or without 2 ¼" C-Rings • fl uted or smooth profi le • 5 Quick Ship Wood and Resin fi nishes • PTH Perfect Match™ Finials are sold separately. 2" or 2 ¼" Portfolio and Quick Ship Wood and Resin fi nials are compatible. Gold Bronze Available colors for EasyPull™ Heavy-Duty Traverse System: For Pinch Pleat

System Features:

  • Heavy-Duty EasyPull™ System supports up to 8 pounds per foot
    center and one-way draw available
    right or left pull option built-in; no restringing required
    simple pull and release action operates draperies with ease
    continuous track available up to 20’; spliced lengths available up to 38’
    color coordinated track, brackets, and components available in Gold or Bronze
    decorative wood fascia available in 2 ¼” fluted or smooth profiles
    Quick Ship Wood and Resin finishes available

Benefits of EasyPull™ Heavy-Duty Traverse Systems:

  • Heavy-Duty System is perfect for heavier treatments
    longer lengths are versatile for residential or commercial projects
    adjustable one cord feature allows user to determine placement of pull cord
    pre-corded with glides and master carriers installed for easy installation; C-rings ship separately and easily snap into glides
    easy to install – track snaps into brackets, fascia clips onto track

How to Order:

choose a style: choose a fascia and finish:
• single or double system

• with or without 2 ¼” C-Rings

2 ¼” fascia fluted or smooth profile

5 Quick Ship Wood and Resin finishes

Finials are sold separately. 2 ¼” Quick Ship Wood and Resin finials are compatible.

Heavy-Duty Traverse Systems

EasyPull™ Traverse Systems Include:

Heavy-Duty Track
• available in Gold or Bronze
• color coordinated to complement fascia fi nish
• may be ordered with or without wood fascia

BRACKETS: Brackets designed for easy installation – simply snap track into plastic tab on bracket.

3″ EasyPull™ Single Bracket

23⁄8″ H x 11⁄8″ W backplate
• available in Gold, Bronze, or White
• included in Single Systems

6″ EasyPull™ Double Bracket

23⁄8″ H x 11⁄8″ W backplate
• available in Gold, Bronze, or White
• included in Double Systems; may be
substituted in Single Systems when
6″ return is needed

Ceiling Mount Bracket

3⁄8″ H x 2 ½” Deep x 7⁄8″ W
• available in White
• single bracket; may be substituted
in Single or Double Systems

EasyPull™ Over-Bracket
31⁄4″ H x 1 1⁄8″ W backplate,
67⁄8″ Return
• available in 5 Quick Ship Wood and
Resin finishes
• used to combine 2 ¼” wood pole with Single Systems
• traverse mounting bracket simply installs under
Over-Bracket using the same screws
• matching shims are provided for other traverse brackets

Pricing & for more traverse system details write us to on bobby.m9@icloud.com.