Posted on

Custom made assembly

SPLICES, BAY RODS & CURVED RODS

Splice
We can ship rods up to 118″ in one piece with standard shipping service. For rods longer than 118″ we recommend splicing. If you require a one piece rod longer
than 118″ please call for a freight quote.custom curtain rod splice
Easy to order,
1. Specify overall rod length and indicate location of splice if other than center. A bracket must be used at each splice point for support.
Miter Cut with Adjustable Joint
The best solution for 1″ or 1-5/8″ bay and corner rods. Adjustable joint is available with 1″ and 1-5/8″ rods only. Rod ends will be miter cut to the angle you specify.
Adjustable joint is hinged to allow adjustment to match mitered angles and slides inside the rod. Set screws on backside of rod tighten to join rod together.
Easy to order,
1. Specify wall angles and backwall measurements (not including finials). We will make the necessary deductions. Adjustable brackets are recommended.
Four brackets are usually sufficient for most three-sided bay windows.
Miter Cut & Weld
Recommended for ½” or ¾” rods.
Specify wall angles and backwall measurements (not including finials).
Adjustable brackets recommended.
Freight shipment may be required.
Miter Cut Only
Recommended when butting ½” or ¾” rods together.
Please specify wall angles and backwall
measurements (not including finials).
Adjustable brackets recommended.
Curved Corner Joint*
For 1″ & 1-5/8″ rods only. Measures 5″ x 5″. Splice
rods into curved corner joint to create a soft 90˚
curve. Non load bearing*.

Continuously Curved Rods
We offer custom curving for bay, bow and arched windows for all of our rods. Rings or tabs can be welded to rods if necessary. Templates are required for bow and arched rods. Please indicate on template where rod ends (not including finials). Adjustable brackets are recommended. Freight shipment may be required.

BATONS, WINDOW CRANES & SCROLL RODS
Iron Batons
Designed to facilitate opening and closing drapery panels. Made of ½” round iron. Specify length (36″, 48″ and 60″ are most common). Hammered end is standard.
A finial may be added for an additional charge. Please specify finial style. Designed to clip on to the body of the lead ring of the drapery panel (not the eyelet).

Window Cranes
Available in ½” round up to 36″. Will support up to 8 lbs. Also available in ¾” round up to 36″. Will support up to 12 lbs. Specify rod length between finial and hinge.
Specify finial style. Base is 2″ round. Projection to rod center is 1½” (custom projection available for an additional charge).

Window Crane Support
Provides additional support and maintains a level appearance for window cranes. Base is 2″ round. Length is 2¾”, (custom length available for an additional charge).

Scroll Rod with Pegs
Specify length tip to tip (up to 60″ maximum).
Specify peg spacing (5″ is typical).
2 concealed round swivel brackets are included and serve as the first attachment
points for treatments.
Custom curving available per quote (template required).

Leave a Reply